bakon-950d
Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
| Nächste Überarbeitung | Vorhergehende Überarbeitung | ||
| bakon-950d [2015/10/02 07:40] – angelegt karl | bakon-950d [2015/10/05 23:53] (aktuell) – karl | ||
|---|---|---|---|
| Zeile 2: | Zeile 2: | ||
| This soldering station is quite interesting, | This soldering station is quite interesting, | ||
| + | - [[http:// | ||
| + | - [[http:// | ||
| The tips have the ceramic heating element included. | The tips have the ceramic heating element included. | ||
| Zeile 8: | Zeile 10: | ||
| This design has 2 major disadvantages: | This design has 2 major disadvantages: | ||
| - | - Every tip has its own heating element, with it's own characteristic. Therfore there is allways a different temperature error. I have measured 6 different tips with a thermocouple temperature sensor at a constant setting of 400°C. The results were between 335C° and 365°C. \\ As a workaround one can use a lookup table for each tip, which is a bit unpractical. | + | - Every tip has its own heating element, with it's own characteristic. Therfore there is allways a different temperature error. I have measured 6 different tips with a thermocouple temperature sensor at a constant setting of 400°C. The results were between 335C° and 365°C. \\ As a workaround one can use a lookup table for each tip, which is a bit unpractical. \\ Edit: there is an adjustment potentiometer at the controller. Therefore the Error can be reduced to about ±15°C. |
| - Since the temperature is measured in the heating wire, that wire is held at a constant temperature. Due to the thermal resistance from the wiire to the tip a big temperature drop is the result on heavy thermal loads. Numerically spoken: The thermal power is reduced by 60%, compared to the ERSA Multi-TC, which has also a nominal power of 75W and a dedicated temperature sensor behind the tip. | - Since the temperature is measured in the heating wire, that wire is held at a constant temperature. Due to the thermal resistance from the wiire to the tip a big temperature drop is the result on heavy thermal loads. Numerically spoken: The thermal power is reduced by 60%, compared to the ERSA Multi-TC, which has also a nominal power of 75W and a dedicated temperature sensor behind the tip. | ||
bakon-950d.1443764433.txt.gz · Zuletzt geändert: 2015/10/02 07:40 von karl